STM32F373VCH6

The STM32F373VCH6 is a STM32 F3 series 32-bit Microcontroller incorporates the high-performance ARM Cortex-M4 RISC core operating at a frequency of up to 72MHz and embedding a floating point unit (FPU), high-speed embedded memories (Flash memory up to 256kB and 16kB of SRAM) and an extensive range of enhanced I/Os and peripherals connected to two APB buses. The device offer a fast 12-bit ADCs, 16-bit sigma-delta (Σ-Δ) ADCs, two comparators, two DACs (DAC1 with 2 channels and DAC2 with 1 channel), a low-power RTC, nine general-purpose 16-bit timers, two general-purpose 32-bit timers, as well as standard and advanced communication interfaces - two I²Cs, three SPIs, three I²Ss, three USARTs, a CAN and an USB FS device.

• 1.25 DMIPS/MHz (Dhrystone 2.1)
• CRC calculation unit
• Power-on/Power down reset (POR/PDR)
• Programmable voltage detector (PVD)
• Low power modes - Sleep, stop, standby
• VBAT supply for RTC and backup registers
• 4 to 32MHz Crystal oscillator
• 32kHz Oscillator for RTC with calibration
• 8MHz Internal RC with x16 PLL option
• 40kHz Internal oscillator
• 12-channel DMA Controller
• Up to 24 capacitive sensing channels
• Independent and system watchdog timers
• SysTick Timer
• Three 16-bit Basic timers to drive the DAC
• Calendar RTC with alarm and periodic wakeup from Stop/Standby
• CAN interface (2.0B Active)
• HDMI-CEC Bus interface
• USB 2.0 full speed interface
• Serial wire devices, JTAG
• 96-bit Unique ID

Uygulamalar

Industrial