MAX25410GTEA/V+

MAX25410GTEA/V+ is an automotive USB power delivery port protector. It is an automotive USB power delivery (USB-PD)-based Type-C protection solution for automotive radio, navigation, connectivity, and USB hub/multimedia module applications. This device provides a one-chip automotive USB-PD protection solution for the CC1, CC2, D+, and D- signals on a USB Type-C connector. It also provides a VCONN switch with advanced fault management that does not require a dedicated supply. The device protection features include ±15kV IEC 61000-4-2, ISO 10605 ESD, and short-to-VBUS (24V) on the protected HVCC1, HVCC2, HVD+, and HVD- pins. It also features integrated BC1.2 charge-detection CDP, DCP, or pass-through (SDP) modes, Apple® 2.4A, Samsung® 2A, and China YD/T 1591-2009 charge-emulation support. It is used in applications such as automotive radio and navigation, automotive USB hubs, and automotive multimedia box applications.

• USB Type-C CC1/CC2 protection switches
• Integrated 550mohm VCONN FETs with 250mA overcurrent protection
• USB 2.0 D+/D- protection switches with 1GHz bandwidth
• 24VCC and USB 2.0 protection against short-to VBS
• Automatic fault detection and recovery with industry compliant reset timings
• VCC supply voltage range from 4.7V to 5.5V, AEC-Q100 and AEC-Q006 qualified
• VCC operating current is 1.5mA maximum at (VCC = 5.0V; VCONN disabled)
• Bias regulator voltage is 3.15V typical at (VCC = 4.7V to 5.5V)
• VCONN, active-low VCONN enable polarity, auto-CDP, SDP(pass-through) USB modes
• Operating temperature range from -40°C to +105°C, 16-pin TQFN-EP package

Notlar

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party