MAX13485EESA+

MAX13485EESA+ is a +5V, half-duplex, ±15kV ESD-protected RS-485 transceiver that features one driver and one receiver. This device includes fail-safe circuitry, guaranteeing a logic-high receiver output when receiver inputs are open or shorted. The receiver outputs a logic high if all transmitters on a terminated bus are disabled (high impedance). The MAX13485E includes a hot-swap capability to eliminate false transitions on the bus during power-up or live insertion. It features reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free transmission up to 500kbps. Typical applications include utility meters, industrial controls, industrial motor drives, and automated HV AC systems.

• 5V operation
• True fail-safe receiver while maintaining EIA/TIA-485 compatibility
• Hot-swappable for telecom applications
• Enhanced slew-rate limiting facilitates error-free data transmission
• Transmission speeds up to 16Mbps
• Extended ESD protection for RS-485 I/O pins ±15kV using human body model
• 1/4 unit load, allowing up to 128 transceivers on the bus
• Output-low voltage is 0.4V at IO=1mA, VA - VB < -VTH, VCC=+5V ±5%, TA=TMIN to TMAX
• 8 SO package
• Operating temperature range from -40°C to +85°C

Notlar

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party