Daha fazlasına mı ihtiyacınız var?
Miktar | |
---|---|
5+ | 0,296 € |
10+ | 0,205 € |
100+ | 0,161 € |
500+ | 0,142 € |
1000+ | 0,136 € |
5000+ | 0,124 € |
10000+ | 0,120 € |
Ürün Bilgileri
Ürün Genel Bakış
The SN74LVC244ADBR is an octal Buffer/Driver with 3-state outputs and designed for 1.65 to 3.6V VCC operation. This device is also designed for asynchronous communication between data buses. This device is organized as two 4-bit buffers/line drivers with separate output-enable (OE) inputs. When OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver.
- IOFF Supports live insertion, partial-power-down mode and back-drive protection
- Allows down voltage translation
- Supports mixed-mode signal operation on all ports
- Inputs accept voltages to 5.5V
- Latch-up performance exceeds 250mA per JESD 17
- 5.9ns at 3.3V Propagation delay (tpd)
- <lt/>0.8V at VCC = 3.3V, TA = 25°C VOLP (output ground bounce)
- <gt/>2V at VCC = 3.3V, TA = 25°C VOHV (output VOH undershoot)
- Green product and no Sb/Br
Uygulamalar
Industrial, Consumer Electronics, Wireless, Imaging, Video & Vision, Signal Processing, Motor Drive & Control
Teknik Özellikler
Buffer, Non Inverting
SSOP
20Pins
3.6V
74244
125°C
-
74LVC244
SSOP
1.65V
74LVC
-40°C
-
No SVHC (27-Jun-2018)
SN74LVC244ADBR için alternatifler
3 Ürün Bulundu
Mevzuat ve Çevre
En son önemli imalat işleminin gerçekleştirildiği ülkeMenşe Ülke:Malaysia
En son önemli imalat işleminin gerçekleştirildiği ülke
RoHS
RoHS
Ürün Uyumluluk Belgesi