Low

PTH08T231WAD - 

Non Isolated POL DC/DC Converter, Adjustable, Through Hole, 1 Output, 33 W, 5.5 V

TEXAS INSTRUMENTS PTH08T231WAD

Resim yalnızca örnek vermeyi amaçlamaktadır. Lütfen ürün açıklamasına bakın.

Üretici Parça No.:
PTH08T231WAD
Sipariş Kodu:
2383162
Teknik Bilgi Formu:
(EN)
Tüm Teknik Belgeleri Görüntüleyin

Ürün Bilgileri

:
33W
:
4.5V
:
Through Hole
:
18.92mm
:
15.75mm
:
-
:
6A
:
-
:
CSA, IEC, UL
:
1 Output
:
Adjustable
:
5.5V
:
14V
:
8.5mm
benzer ürünleri bulun Benzer ürünler bulmak için yukarıdaki özellikleri seçin ve değiştirin.

Ürün Genel Bakış

The PTH08T231WAD is a 1-output 33W through hole-mount non-isolated Adjust Power Module with TurboTrans™. The PTH08T231W is the higher input voltage (4.5 to 14V) version of the PTH04T231W (2.2 to 5.5V), 6A rated, non-isolated power module. This regulator represents the 2nd generation of the PTH series of power modules which include a reduced footprint and improved features. The PTH08T231W is optimized to be used in applications requiring all ceramic capacitors. Operating from an input voltage range of 4.5 to 14V, the PTH08T231W requires a single resistor to set the output voltage to any value over the range, 0.69 to 5.5V. The wide input voltage range makes the PTH08T231W particularly suitable for advanced computing and server applications that use a loosely regulated 8 to 12V intermediate distribution bus. Additionally, the wide input voltage range increases design flexibility by supporting operation with tightly regulated 5, 8 or 12V intermediate bus architectures.
  • Output overcurrent protection (non-latching, auto-reset)
  • Pre-bias start-up
  • ON/OFF inhibit
  • Differential output voltage remote sense
  • Adjustable under-voltage lockout
  • Auto-Track sequencing
  • Designed to meet ultra-fast transient, requirements up to 300A/µs
  • SmartSync technology
  • Ceramic cap version
  • ±1.5% Total output voltage variation
  • 95% Efficiency

Uygulamalar

Power Management, Signal Processing

İlgili Ürünler

Seçilenleri Karşılaştır